La Frite (AML-S805X-AC): power rails
16 rails and 15 parts that make or pass them, read off the board's published schematic. Each rail's voltage is the nominal its name states.
| Rail | Voltage | Fed by | Feeds |
|---|---|---|---|
DC_5V |
5 V | 1U2 (Input protection from VBUS_5V); Passes the input | — |
HDMI_PW |
5 V | 9R8 (0 Ω resistor from VCC5V); Always connected | — |
USBHOST_A_5V |
5 V | 6F1 (Fuse from VCC5V); Always connected | — |
USBOTG_B_5V |
5 V | 6F2 (Fuse from VCC5V); Always connected | — |
VBUS_5V |
5 V | Board input (Micro-USB) | — |
VCC5V |
5 V | 1R4 (0 Ω resistor from DC_5V); Always connected | — |
VDDIO_AO3_3V |
3.3 V | 1U4 (Buck regulator from DC_5V); Enable pulled up to DC_5V | SoC AVDD33_USB, VDDIO_AO, VDDIO_DV_HZ |
VDDIO_X |
3.3 V | 7R1 (0 Ω resistor from VDDIO_AO3_3V); Always connected | SoC VDDIO_X |
DDR4_2_5V |
2.5 V | 3U2 (LDO regulator from VDDIO_AO3_3V); Enable tied to its input | — |
RCT_1V8 |
1.8 V | 5R12 (0 Ω resistor from VCC1_8V); Always connected | — |
VCC1_8V |
1.8 V | 1U5 (LDO regulator from VDDIO_AO3_3V); Enable tied to its input | SoC AVDD18_AUDIO_CVBS, AVDD18_ENET_EFUSE, AVDD18_HDMITX, AVDD18_PLL_ADC, AVDD18_USB, AVDD18_XTAL_IOVREF |
VDDQ1_2V |
1.2 V | 1U3 (Buck regulator from DC_5V); Enable tied to VDDIO_AO3_3V | SoC VDDQ |
VCCK |
Not stated | 1U6 (Buck regulator from DC_5V); Enable from SoC GPIOAO_9, pulled up | SoC VDDCPU |
VCCQ_EMMC |
Not stated | 1U7 (LDO regulator from VDDIO_AO3_3V); Enable tied to its input | — |
VDD_EE |
Not stated | 1U1 (Buck regulator from DC_5V); Enable pulled up to DC_5V | SoC VDDAO_0V9, VDDEE_0V9 |
VDDIO_BOOT |
Not stated | 4R22 (0 Ω resistor from VCCQ_EMMC); Always connected | SoC VDDIO_BOOT |