Skip to content
Libre Computer

Libre Computer board power

Solitude (AML-S905D3-CC): power rails

20 rails and 19 parts that make or pass them, traced from the board's layout netlist. Each rail's voltage is the nominal its name states.

RailVoltage Fed byFeeds
5V_IN 5 V Board input (USB-C) 1J1 pins A4, A9, B4, B9
HUB_5V 5 V 6R1 (0 Ω resistor from VCC5V); Always connected —
VCC5V 5 V 1Q3 (Load switch from 5V_IN); Gate through a transistor stage 40-pin header pins 2, 4
ETH_AVDD33 3.3 V 5FB4 (Ferrite bead from ETH_VCC33); Always connected —
ETH_VCC33 3.3 V 5R80 (0 Ω resistor from VCC3_3V); Always connected —
VCC3_3V 3.3 V 1Q2 (Load switch from VDDAO_3_3V); Gate through a transistor stage SoC VDDIO_A
4J1 pins 1, 3, 5, 7, 9, 11
8J1 pin 22
8J2 pin 22
10U3
VDDAO_3_3V 3.3 V 1U8 (Buck regulator from 5V_IN); Enable set by a resistor divider SoC AVDD33_USB, VDDIO_AO, VDDIO_H
40-pin header pins 1, 17
2U2
VDDIO_X 3.3 V 7R1 (0 Ω resistor from VDDAO_3_3V); Always connected SoC VDDIO_X
AVDD18_V 1.8 V 9FB1 (Ferrite bead from VCC1_8V); Always connected SoC AVDD18_CVBS, AVDD18_MIPIDSI
ETH_VDDIO 1.8 V 5R81 (0 Ω resistor from FLASH_1_8V); Always connected SoC VDDIO_Z
FLASH_1_8V 1.8 V 1U2 (LDO regulator from VCC3_3V); Enable tied to its input —
VCC1_8V 1.8 V 1U4 (LDO regulator from VCC3_3V); Enable tied to its input —
VDDIO_AO18 1.8 V 1U5 (LDO regulator from VDDAO_3_3V); Enable tied to its input SoC AVDD18_AUDIO, AVDD18_DPLL, AVDD18_ENET, AVDD18_HDMI, AVDD18_MIPICSI, AVDD18_SARADC, AVDD18_USB, VDD18_AO_XTAL
U4
VDDIO_BOOT 1.8 V 4R34 (0 Ω resistor from FLASH_1_8V); Always connected SoC VDDIO_BOOT
4J1 pins 13, 15, 17, 19, 21, 23
4U2
VDDQ_1V1 1.1 V 1U11 (Buck regulator from 5V_IN); Enable pulled up to VDDAO_3_3V SoC AVDD_DDRPLL, VDDQ
U4
AVDD0V8_HDMI_PCIE 0.8 V 9FB2 (Ferrite bead from VDD_EE); Always connected SoC AVDD0V8_HDMI
VDD_EE Not stated 1U3 (Buck regulator from 5V_IN); Enable set by a resistor divider SoC AVDD0V8_USB_PCIE, VDD_DDR, VDD_EE
VDDCPU_A Not stated 2R7 (0 Ω resistor from VDDCPU_B); Always connected SoC VDDCPU
VDDCPU_B Not stated 1U12 (Buck regulator from 5V_IN); Enable through a transistor stage from SoC TEST_N SoC VDDCPU
VDDIO_C Not stated 1U7 (LDO regulator from VDDAO_3_3V); Enable through a transistor stage from SoC GPIOX_4 SoC VDDIO_C

What feeds what, and what is on when, from each board's own netlist or published schematic · Learn how it works: first power-on and voltage rails