Skip to content
Libre Computer

Libre Computer board power

Sweet Potato (AML-S905X-CC-V2): power rails

22 rails and 22 parts that make or pass them, traced from the board's layout netlist. Each rail's voltage is the nominal its name states.

RailVoltage Fed byFeeds
AO_5V 5 V 1Q8 (Load switch from DC_5V_IN); Gate through a transistor stage —
DC_5V_IN 5 V Board input (USB-C) —
USBHOST_A_5V 5 V 6F2 (Fuse from VCC5V); Always connected 6J2 pins 1, 2
USBOTG_B_5V 5 V 6F1 (Fuse from VCC5V); Always connected 6J3 pins 1, 2
VCC5V 5 V 1Q4 (Load switch from AO_5V); Gate from SoC GPIOH_3, pulled up 40-pin header pins 2, 4
9J2 pin 3
HUB_3V3 3.3 V 6R17 (0 Ω resistor from VDDIO_AO3_3V); Always connected 6U1
HUB-AVDD 3.3 V 6FB1 (Ferrite bead from HUB_3V3); Always connected 6U1
VDDIO_AO3_3V 3.3 V 1U4 (Buck regulator from AO_5V); Enable pulled up to AO_5V SoC AVDD33_USB, VDDIO_AO, VDDIO_DV_CLK, VDDIO_HZ
2J3 pin 8
4J1 pins 1, 3, 5, 7, 9, 11
40-pin header pins 1, 17
2U2
VDDIO_X 3.3 V 7R1 (0 Ω resistor from VDDIO_AO3_3V); Always connected SoC VDDIO_X
DDR4_2_5V 2.5 V 3U2 (LDO regulator from VDDIO_AO3_3V); Enable tied to its input 3U4, 3U5
AVDD18_ENET 1.8 V 5R3 (0 Ω resistor from VDDIO_AO18); Always connected SoC AVDD18_ENET_EFUSE
RCT_1V8 1.8 V 5R2 (0 Ω resistor from VDDIO_AO18); Always connected 5U2
VCC1_8V 1.8 V 1U7 (LDO regulator from VDDIO_AO3_3V); Enable tied to its input —
VDDIO_AO18 1.8 V 1U2 (LDO regulator from VDDIO_AO3_3V); Enable tied to its input SoC AVDD18_HDMITX, AVDD18_HPLL, AVDD18_PLL_ADC, AVDD18_USB, AVDD18_XTAL
VDDIO_BOOT 1.8 V 4R22 (0 Ω resistor from VCC1_8V); Always connected SoC VDDIO_BOOT
4J1 pins 13, 15, 17, 19, 21, 23
4U1
DDR4_1_2V 1.2 V 1U3 (Buck regulator from AO_5V); Enable tied to VDDIO_AO3_3V SoC VDDQ
3U4, 3U5
AVDD09_HDMI 0.9 V 9R10 (0 Ω resistor from VDD_EE); Always connected SoC AVDD0V9_HDMITX
AVDD0V9_ENET 0.9 V 5R12 (0 Ω resistor from VDD_EE); Always connected SoC AVDD0V9_ENET
VCC_CARD Not stated 6Q2 (Load switch from VDDIO_AO3_3V); Gate through a transistor stage 6J1 pin 4
VCCK Not stated 1U6 (Buck regulator from AO_5V); Enable from SoC GPIODV_25, pulled up SoC VDDCPU
VDD_EE Not stated 1U1 (Buck regulator from AO_5V); Enable pulled up to AO_5V SoC VDDAO_0V9, VDDEE_0V9
VDDIO_CARD Not stated 6Q1 (Load switch from VDDIO_AO3_3V); Gate from SoC GPIOAO_3, pulled down
6U2 (LDO regulator from VDDIO_AO3_3V); Enable from SoC GPIOAO_3, pulled down
SoC VDDIO_CARD

What feeds what, and what is on when, from each board's own netlist or published schematic · Learn how it works: first power-on and voltage rails