Le Potato (AML-S905X-CC): power rails
17 rails and 15 parts that make or pass them, read off the board's published schematic. Each rail's voltage is the nominal its name states.
| Rail | Voltage | Fed by | Feeds |
|---|---|---|---|
AO_5V |
5 V | 1Q8 (Load switch from DC_5V_IN); Gate through a transistor stage | — |
DC_5V_IN |
5 V | Board input (Micro-USB) | — |
HDMI_PW |
5 V | 9R8 (0 Ω resistor from VCC5V); Always connected | — |
USBHOST_A_5V |
5 V | 6F1 (Fuse from VCC5V); Always connected | — |
USBOTG_B_5V |
5 V | 6F2 (Fuse from VCC5V); Always connected | — |
VCC5V |
5 V | 1Q4 (Load switch from AO_5V); Gate from SoC GPIOH_3, pulled up | — |
AVDD33_HDMI |
3.3 V | Source not traced | SoC AVDD33_HDMITX |
HUB-AVDD |
3.3 V | FB1 (Ferrite bead from VDDIO_AO3.3V); Always connected | — |
Q6.D |
3.3 V | Q6 (Load switch from VDDIO_AO3.3V); Gate from SoC GPIOAO_3, pulled down | — |
VDDIO_AO3.3V |
3.3 V | 1U4 (Buck regulator from AO_5V); Enable pulled up to AO_5V | SoC AVDD33_USB, VDDIO_AO, VDDIO_DV_CLK, VDDIO_HZ |
VDDIO_X |
3.3 V | 7R1 (0 Ω resistor from VDDIO_AO3.3V); Always connected | SoC VDDIO_X |
VDDIO_AO18 |
1.8 V | 1U2 (LDO regulator from VDDIO_AO3.3V); Enable tied to its input | SoC AVDD18_Audio, AVDD18_CVBS, AVDD18_ENET_EFUSE, AVDD18_HDMITX, AVDD18_HPLL, AVDD18_PLL_ADC, AVDD18_USB, AVDD18_XTAL, IOVREF_18 |
DDR3_1.5V |
1.5 V | 1U3 (Buck regulator from AO_5V); Enable tied to VDDIO_AO3.3V | SoC VDDQ |
VCC-CARD |
Not stated | D46 (Input protection from Q6.D); Passes the input 1U5 (LDO regulator from VDDIO_AO3.3V); Enable from SoC GPIOAO_3, pulled down |
SoC VDDIO_CARD |
VCCK |
Not stated | 1U6 (Buck regulator from AO_5V); Enable from SoC GPIODV_25, pulled up | SoC VDDCPU |
VDD_EE |
Not stated | 1U1 (Buck regulator from AO_5V); Enable pulled up to AO_5V | SoC AVDD0V9_ENET, AVDD0V9_HDMITX, VDDAO_0V9, VDDEE_0V9 |
VDDIO_BOOT |
Not stated | Source not traced | SoC VDDIO_BOOT |