Skip to content
Libre Computer

Libre Computer board power

Renegade (ROC-RK3328-CC): power rails

28 rails and 26 parts that make or pass them, read off the board's published schematic. Each rail's voltage is the nominal its name states.

RailVoltage Fed byFeeds
VCC_OTG_5V 5 V U2500 (Load switch from VCC_SYS); Gate from SoC GPIO1_D2 —
VCC_RTC 5 V D5 (Input protection from VCC_SYS); Passes the input —
VCC_SYS 5 V Board input (Micro-USB) —
VCC5V_HDMI 5 V D2600 (Input protection from VCC_SYS); Passes the input —
VCC5V0_HOST1 5 V U34 (Load switch from VCC_SYS); Gate from SoC GPIO1_D2 —
VCC33_AMP 3.3 V L2909 (Inductor from VCC_IO); Always connected —
VCC25_DDR 2.5 V U4004 (LDO regulator from VCC_SYS); Enable pulled up to VCC_SYS —
USB20/FEPHY_1V8 1.8 V L1201 (Inductor from VCC_18); Always connected SoC FEPHY_AVDD_1V8, USB20_AVDD_1V8
VCC18_CODEC 1.8 V L1501 (Inductor from VCC_18); Always connected SoC CODEC_AVDD_1V8
VCC18_EMMC 1.8 V U701 (LDO regulator from VCC_IO); PMIC output —
VCC18_HDMI/VADC 1.8 V L1401 (Inductor from VCC_18); Always connected SoC HDMI_AVDD_1V8, VDAC_AVDD_1V8
VDDPLL/USB30_1V8 1.8 V L901 (Inductor from VCC_18); Always connected SoC PLL_AVDD_1V8, USB30_AVDD_1V8
USB20/FEPHY_1V0 1 V L1203 (Inductor from VDD_LOG); Always connected SoC FEPHY_AVDD_1V0, USB20_DVDD_1V0
VDD10_EPHY 1 V U17 (Buck regulator from VCC_LAN); Enable tied to its input —
VDD10_HDMI/PMU 1 V R1402 (Series resistor from VDD_10); Always connected SoC HDMI_AVDD_1V0, VDD_PMU
VDDPLL/USB30_1V0 1 V L900 (Inductor from VDD_10); Always connected SoC PLL_DVDD_1V0, USB30_DVDD_1V0
U2210.OUT Not stated U2210 (LDO regulator from VCC_SYS); Enable pulled up to VCC_IO —
VCC_18 Not stated U701 (LDO regulator from VCC_IO); PMIC output SoC OTP_VCC18, SARADC_AVDD_1V8
VCC_DDR Not stated U701 (Buck regulator from VCC_SYS); PMIC output SoC VDD_DDRIO
VCC_IO Not stated U701 (Buck regulator from VCC_SYS); PMIC output SoC USB20_AVDD_3V3, USB30_AVDD_3V3, USB30_VBUS, VCCIO1, VCCIO5, VCCIO6, VCCIO_PMU
VCC_LAN Not stated L33 (Inductor from VCC_IO); Always connected —
VCC_SD Not stated Q2100 (Load switch from VCC_IO); Gate from SoC GPIO0_D6, pulled down —
VCCIO_FLASH Not stated Source not traced SoC VCCIO2
VCCIO_SD Not stated R1807 (Series resistor from U2210.OUT); Always connected SoC VCCIO3
VCCIO4 Not stated R3717 (0 Ω resistor from VCC_IO); Always connected SoC VCCIO4
VDD_10 Not stated U701 (LDO regulator from VCC_IO); PMIC output —
VDD_ARM Not stated U701 (Buck regulator from VCC_SYS); PMIC output SoC VDD_CORE
VDD_LOG Not stated U701 (Buck regulator from VCC_SYS); PMIC output SoC VDD_LOGIC

What feeds what, and what is on when, from each board's own netlist or published schematic · Learn how it works: first power-on and voltage rails